xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
74
upload
Used to uplo
ad the current switch settings or the switch history log to a
TFTP.
Purpose
uploa
d [cfg_toTFTP | log_toTFTP] [<ipaddr>|<ipv6addr>]
<path_filename 64>
Syntax
This
command is used to upload either the Switch’s current settings or
the Switch’s history log to a TFTP server.
Description
Parameters
cfg_toTFTP Specifies that the Switch’s current settings will be
uploaded to the TFTP server.
log_toTFTP Specifies that the switch history log will be uploaded to
the TFTP server.
<ipaddr> The IP address of the TFTP server. The TFTP server must
be on the same IP subnet as the Switch.
<ipv6addr> The IPv6 address of the TFTP server.
<path_filename 64> Specifies the location of the Switch
configuration file on the TFTP server. This file will be replaced by the
uploaded file from the Switch.
The TFTP se
rver must be on the same IP subnet as the Switch. Only
Administrator-level users can issue this command.
Restrictions
Example usage:
To upload a configuration file:
DES-3200-28:4#upload cfg_toTFTP 10.48.74.121 c:\cfg\log.txt
Command: upload cfg_toTFTP 10.48.74.121 c:\cfg\log.txt
Success.
Connecting to server................... Done.
Upload configuration...................Done.
DES-3200-28:4#
To Next Page
Loading...
Need help?
General
