D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
81
config terminal line
Used to co
nfigure the number of rows which can be displayed at a
screen.
Purpose
config termin
al_line [default | <value 20-80>]
Syntax
This
command is used to configure the number of rows which can be
displayed on a screen. The default value is 24.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To configure the terminal line:
DES-3200-28:4# config terminal_line 30
Command: config terminal_line 30
Success.
DES-3200-28:4#
show terminal line
Used to displ
ay the number of rows which can be displayed at a
screen.
Purpose
s
how terminal_line
Syntax
This
command is used to display the number of rows which can be
displayed on a screen.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To show the terminal line:
DES-3200-28:4# show terminal_line
Command: show terminal_line
Current terminal line number : 30
DES-3200-28:4#

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)