Need help?Do you have a question about the DACE RT25/50 and is the answer not in the manual?
General| Model | RT25/50 |
|---|---|
| Category | Gate Opener |
| Maximum Gate Weight | 500 kg |
| Protection Rating | IP44 |
| Maximum Gate Width | 5 m |
| Operating Temperature | -20°C to +55°C |
| Control Type | Remote Control |
| Battery Backup | Available |
Welcomes users and highlights the manual's purpose and the product's quality.
Provides an overview of gate automation and essential installation advice.
Crucial warnings regarding mains voltage connection and electrical safety.
Details specifications for RT25/50 and HT18/36 gate operators.
Identifies potential hazards and entrapment points in gate operation.
Illustrates and names the key components of the gate operator.
Depicts the typical placement of gate components and accessories.
Advises on the importance of level gates and potential risks on slopes.
Outlines recommended cable types and power supply options for installation.
Details the process of securing the operator's foundation plate.
Explains how to attach the drive rack to the gate.
Instructions for filling the operator's gearbox with oil.
Diagram showing terminal connections and components on the control board.
Explains the main power inputs, fuses, and their purposes.
Describes the functions of low-power inputs and outputs for accessories.
Details mains and solar power supply configurations.
Explains various functions accessible via the controller's menu.
Configuration options for safety beams and their behaviour.
Settings for automatic gate closure after opening.
Procedures for programming and managing remote controls and user groups.
Configuration for alarm functions and security features.
Options for controlling electric and magnetic locks.
Different operational modes like Standard and Condo/Multi User.
Feature for time-based access control and function scheduling.
Guides through initial gate limit programming.
Configuration of closing force, opening force, and anti-crush gap.
Customization of gate movement parameters like ramp and crawl speeds.
Steps for updating the operator's firmware.
Recommended checks and maintenance tasks for the operator.
Lists potential error messages and their solutions.
Comprehensive technical details of the system and components.
Legal disclaimers and usage conditions.
Details the manufacturer's warranty terms and conditions.
To Next Page