DACE RT25/50 - Terms & Conditions

49
These Terms and Condions must be read carefully as, by commissioning the product, the user does acknowledge
full acceptance thereof.
 All DACE products are products of convenience only and are not deemed to be security devices. While it
might be possible to connect some products to an alarm system, these products may never be relied on as
the primary intrusion detecon/prevenon device.
 It is the user's responsibility to ensure that the gate has closed properly and is in good working order before
leaving the premises.
 The automaon of each gate varies slightly. While DACE has tried to select the most commonly used sengs
as the default sengs on the controller, your specic installaon may need seng adjustment to funcon at
its opmum.
 In the event of a DACE product malfunconing, DACE will under no circumstances be held responsible for
compromising the site's security.
 All DACE operators must be ed with safety beams or edges. If the user elects not to install these safety
devices, they acknowledge that there is a high risk of the gate or door closing on an object, person or animal.
In some countries it is a legal requirement for safety beams to be ed.
 DACE will not be held responsible for any damage, injury or death caused by an operator closing a gate onto
an object, animal or person.
 It is the responsibility of the user to ensure that the gate is staonary prior to passing through it.
 It is the user's responsibility to ensure that there are no objects, animals or people that could be damaged or
injured near the gate prior to operang it.
 The user must, at all mes, be aware of objects, animals or people near the gate while it is moving and be
ready to stop the gate in the event of an emergency.
 It is the user's responsibility to ensure that the product always has the latest soware installed that might
aect the operator's safe operaon.
 It is the user's responsibility to test the operators external and internal safety devices and sensors from me
to me to ensure that all is in good working order.
 The user is aware that a gate is a heavy piece of equipment and, by automang it, it highly increases the risk
that it could cause damage, injury or even death. Regardless of the fact that DACE has tried its utmost in
reducing these risks, they will always remain. As such, the user and owner accepts all liability regarding these
risks and endeavours to make any person using the operator aware of these risks.
TERMS & CONDITIONS
SECURITY FEATURES
Alarm Inputs Securi-Lock gate forced alarm, Ambush alarm, Break in alarm, Tamper alarm, Gate
open alarm
Alarm Outputs Open Collector (200mA)
Lock Electric or Magnec
Light Courtesy and Warning
GATE
Gate Mass 600kg (maximum)
Gate Speed 55 m/min (maximum)
Push Force 270 N (maximum)
Manual Override Lockable door with thumb wheel
Maximum Operaons
per day
150 (gate mass and baery dependant)
>1000 (when transformer driven)
RECEIVER
Onboard Receiver Type 66 bit rolling code (DuraCrypt)
Channels 15
Storage Capacity 1024 devices
……..connued