Local Configurations 152
Adjust the threshold for motion detect. Every region of every channel
has an individual threshold.
Figure 5-123
When anyone of the four regions activates motion detect alarm, the channel where this
region belongs to will activate motion detect alarm.
Right-click on the screen to exit the region setting interface. Step 4
On the Motion Detect interface, click Apply to complete the settings. Step 5
Setting Motion Detection Period
The system only activates the alarm in the defined period.
Next to Period, click Setting.
Step 1
The Setting interface is displayed. See Figure 5-124.
Figure 5-124
Define the motion detection period. By default, it is active all the time. Step 2
Define the period by drawing.
Define for a specified day of a week: On the timeline, click the half-hour blocks
to select the active period.
Define for several days of a week: Click before each day, the icon
switches to . On the timeline of any selected day, click the half-hour blocks
to select the active periods, all the days with will take the same settings.
Define for all days of a week: Click All, all switches to . On the
timeline of any day, click the half-hour blocks to select the active periods, all
the days will take the same settings.
Define the period by editing. Take Sunday as an example.
To Next Page
Loading...
Need help?
General