User's Manual
147
Figure 4-46
Step 11 Click
Finished
to complete the setup.
4.2.3 Shortcut Menu to Add Camera
Background Information
If you have not registered a remote device to a channel, go to the live view interface to add.
Procedure
Step 1 On the live view interface, move your mouse to window.
There is an icon + on the channel window. See Figure 4-47.
Figure 4-47
Step 2 Click "+", device pops up interface to add network camera. Refer to "4.1.4.4 Adding
Camera" for detailed information.
To Next Page
Loading...
