Dahua L Series

User's Manual
235
Figure 4-133 General alarm (AI by recorder)
Step 3 Click
Setting
next to
Schedule
to configure arming periods. The corresponding alarm
actions are linked by the alarm events triggered during armed period.
Step 4 Arm target face database.
●
General Alarm
: The alarm is triggered when the similarity of detected faces reaches
the defined value.
Select
General Alarm
in
AI Mode
, click
Setting
next to
Target Face Database
, select
the face database that you want to arm, and then click
OK
.
Click to modify similarity, and click to configure alarm linkages.
●
Stranger Alarm
: The alarm is triggered when the similarity of detected faces does not
reach the defined value.
Select
Stranger Alarm
in
AI Mode
, click
Setting
next to
Target Face Database
, enable
the function, and then set alarm linages.