Dahua L Series User Manual

401
Parameter
Function
HDD full
It is to select working mode when hard disk is full. There are two options:
stop recording or rewrite.
 Stop: If current HDD is full while there is no idle HDD, then system
stops recording,
 Overwrite: If the current HDD is full while there is no idle HDD, then
system overwrites the previous files.
Pack
duration
It is to specify record duration. The max value is 120 minutes.
Auto
delete old
files
 Never: Do not auto delete old files.
 Customized: input customized period here, system can auto delete
corresponding old files
5.10.4.2 Schedule
In this interfaces, you can add or remove the schedule record setup. See Figure 5-101.
There are four record modes: general (auto), motion detect, alarm and MD&alarm. There are six periods
in one day.
You can view the current time period setup from the color bar.
 Green color stands for the general record/snapshot.
 Yellow color stands for the motion detect record/snapshot..
 Red color stands for the alarm record/snapshot.
 Blue color stands for MD&alarm record/snapshot.
Figure 5-101

Dahua L Series Specifications

General

Brand	Dahua
Model	L Series
Category	Network Hardware
Language	English