Step 5 Set security questions.
Note
After setting the security questions here, you can use the email you input
here or answer the security questions to reset admin password. Refer to
chapter 4.1.3 Reset password for detailed information.
Cancel the email or security questions box and then click Next button to skip
this step.
Email: Input an email address for reset password purpose. In case you
forgot password in the future, input the security code you got on the
assigned email to reset the password of admin. If you have not input email
here or you need to update the email information, please go to the main
menu->Setting->System->Account to set.
Security question: Set security questions and corresponding answers.
Properly answer the questions to reset admin password. In case you have
not input security question here or you need to update the security question
information, please go to the main menu->Setting->System->Account to set.
Step 6 Click OK to complete the device initialization setup.
Device goes to startup wizard interface. Refer to chapter 0 Quick Settings for
detailed information.
If you forgot admin password, you can reset the password by email or by answering the
security questions.
Steps:
Step 1 Go to the device login interface. See Figure 4- 4 or Figure 4- 5. .
If you have set unlock pattern, device displays unlock pattern login interface.
See Figure 4- 4. Click “Forgot unlock pattern”, device goes to Figure 4- 5.
If you have not set unlock pattern, device displays password interface. See
Figure 4- 5.
Note
Click Switch user button in Figure 4- 4 or click the user name in Figure 4- 5 and
then select a user from the dropdown list, you can login via other account.
To Next Page
Loading...
Need help?
General
