Dahua XVR5116HS User Manual

490
5 WEB OPERATION
Note
Slightly difference may be found in the interface due to different series.
5.1 Network Connection
Before web client operation, please check the following items:
Step 1 Network connection is right
Step 2 DVR and PC network setup is right. Please refer to Chapter 5.10.2 Network
(main menu->Setting->Network)
Step 3 Use order ping ***.***.***.***(* is DVR IP address) to check connection is OK or
not. Usually the return TTL value should be less than 255.
Note

Device default IP address is 192.168.1.108.

Current series product supports various browsers such as Safari, fire fox browser,
Google browser. Device supports multiple-channel monitor, PTZ control, DVR
parameter setup on the Apple PC.
5.2 Device Initialization
If it is your first time to use the device, please set a login password of admin (system
default user).
Note
For your device safety, please keep your login password of admin well after the
initialization steps, and change the password regularly.
Steps:
Step 1 Open the browser and then input the device IP address in the address column.
Step 2 Click Enter button.
Device displays device initialization interface. See Figure 5- 1.

Dahua XVR5116HS Specifications

General

USB Interface	2 USB 2.0 ports
Power Supply	DC 12V/2A
Video Output	1 HDMI, 1 VGA
Operating System	Embedded Linux
Video Compression	H.264+/H.264
Analog Camera Input	16 channel, BNC
IP Camera Input	Up to 16 channels
Audio In/Out	1/1, RCA
Display Resolution	1920 × 1080, 1280 × 1024, 1280 × 720
Network Interface	1 RJ-45 Port (10/100 Mbps)
HDD	1 SATA port, up to 6 TB
Dimensions	260 mm × 238 mm × 48 mm (W × D × H)
Smart Functions	SMD Plus
VGA Output	1920 × 1080, 1280 × 1024, 1280 × 720
Operating Temperature	-10°C to +55°C
Operating Humidity	10%–90% (RH), non-condensing