Dahua XVR5116HS User Manual

308
Figure 4- 18
Step 3 Click Apply or Save to complete setup.
4.1.4.3 P2P
You can add a device via the client on the cellphone or the platform.

You can use your cell phone to scan the QR code and add it to the cell phone client.

Go to the P2P management platform, via the SN from scanning the QR code, you can
access the device in the WAN. Please refer to the P2P operation manual.
Besides startup wizard and configuration wizard, from main
menu->Setting->Network->P2P, you can also go to the P2P interface. See Figure 4- 19.
Check the box to enable P2P function, and status is online. Cell phone or the platform can
add and access the device.

Dahua XVR5116HS Specifications

General

USB Interface	2 USB 2.0 ports
Power Supply	DC 12V/2A
Video Output	1 HDMI, 1 VGA
Operating System	Embedded Linux
Video Compression	H.264+/H.264
Analog Camera Input	16 channel, BNC
IP Camera Input	Up to 16 channels
Audio In/Out	1/1, RCA
Display Resolution	1920 × 1080, 1280 × 1024, 1280 × 720
Network Interface	1 RJ-45 Port (10/100 Mbps)
HDD	1 SATA port, up to 6 TB
Dimensions	260 mm × 238 mm × 48 mm (W × D × H)
Smart Functions	SMD Plus
VGA Output	1920 × 1080, 1280 × 1024, 1280 × 720
Operating Temperature	-10°C to +55°C
Operating Humidity	10%–90% (RH), non-condensing