Dahua XVR5116HS User Manual

316
Figure 4- 27
Step 10 Click Finish to complete the initialization.
4.1.4.4.2Auto Add
Step 1 Click IP Search, device displays searched results.
Step 2 Double click an IP address or select an IP address and then click Add button, it is
to register the device to the DVR. Device supports batch add.
4.1.4.4.3Manual Add
Step 1 Click Manual add to register the camera manually. There are three modes:
TCP/UDP/Auto. The default setup is TCP. See Figure 4- 28.
Step 2 Input the corresponding value and then click OK button.
Note

This series product supports the IPC from many popular manufactures such
as Sony, Hitachi, Axis, Samsung, Dynacolor, Arecont, Onvif and Dahua.

System default IP address is 192.168.0.0 if you do not input IP address.
System will not add current IP address.

You cannot add two or more devices in the Manual Add interface (Figure
4- 28.). Click OK button, system connects to the corresponding front-end
device of current channel on the interface.
 means connection successful. means connection failed.

Dahua XVR5116HS Specifications

General

USB Interface	2 USB 2.0 ports
Power Supply	DC 12V/2A
Video Output	1 HDMI, 1 VGA
Operating System	Embedded Linux
Video Compression	H.264+/H.264
Analog Camera Input	16 channel, BNC
IP Camera Input	Up to 16 channels
Audio In/Out	1/1, RCA
Display Resolution	1920 × 1080, 1280 × 1024, 1280 × 720
Network Interface	1 RJ-45 Port (10/100 Mbps)
HDD	1 SATA port, up to 6 TB
Dimensions	260 mm × 238 mm × 48 mm (W × D × H)
Smart Functions	SMD Plus
VGA Output	1920 × 1080, 1280 × 1024, 1280 × 720
Operating Temperature	-10°C to +55°C
Operating Humidity	10%–90% (RH), non-condensing