Dahua XVR5116HS User Manual

479

Input email information and then click Save, it is to set/change email address.
 Check the box to enable unlock pattern and then click , click Save to change
unlock pattern.

Set security question
Step 1 Click Security question, enter the following interface. See Figure 4- 224.
Figure 4- 224
Step 2 Input answers and then click Save button.
After successfully set security questions, you can answer the security questions
to reset admin password.
Note
Select security questions from the dropdown list and then input the proper
answers, click Delete button to reset security questions and answers again.
4.9.5.9.3Change Password
In Figure 4- 222, check the Modify password box, you can change password. Please input
old password, and then input new password twice to confirm.

Password/confirm password: The password ranges from 8 to 32 digitals. It can
contain letters, numbers and special characters (excluding “'”,“"”,“;”,“:”,“&”) . The
password shall contain at least two categories. Usually we recommend the strong
password.
WARNING

Dahua XVR5116HS Specifications

General

USB Interface	2 USB 2.0 ports
Power Supply	DC 12V/2A
Video Output	1 HDMI, 1 VGA
Operating System	Embedded Linux
Video Compression	H.264+/H.264
Analog Camera Input	16 channel, BNC
IP Camera Input	Up to 16 channels
Audio In/Out	1/1, RCA
Display Resolution	1920 × 1080, 1280 × 1024, 1280 × 720
Network Interface	1 RJ-45 Port (10/100 Mbps)
HDD	1 SATA port, up to 6 TB
Dimensions	260 mm × 238 mm × 48 mm (W × D × H)
Smart Functions	SMD Plus
VGA Output	1920 × 1080, 1280 × 1024, 1280 × 720
Operating Temperature	-10°C to +55°C
Operating Humidity	10%–90% (RH), non-condensing