Dahua XVR5116HS User Manual

492
Figure 5- 2
Step 5 Set security questions.
Note

After setting the security questions here, you can use the email you input here or
answer the security questions to reset admin password Refer to chapter 5.4
Reset password for detailed information.

Cancel the email or security questions box and then click Next button to skip this
step.

Email: Input an email address for reset password purpose. Scan the QR code to
reset the password, you need to receive the security code by the email. Input the
security code to reset the password of admin. In case you have not input email
address here or you need to update the email information, please go to the main
interface->System->Account to set. Refer to chapter 5.10.5.9 Account for
detailed information.

Security question: Set security questions and corresponding answers. Properly
answer the questions to reset admin password. In case you have not input
security question here or you need to update the security question information,
please go to the local main interface->Setting->System->Account->Security
question to set. Refer to chapter 5.10.5.9 Account for detailed information.
Note
If you want to reset password by answering security questions, please go to the
local menu interface.
Step 6 Click OK to complete the device initialization setup. See Figure 5- 3.

Dahua XVR5116HS Specifications

General

USB Interface	2 USB 2.0 ports
Power Supply	DC 12V/2A
Video Output	1 HDMI, 1 VGA
Operating System	Embedded Linux
Video Compression	H.264+/H.264
Analog Camera Input	16 channel, BNC
IP Camera Input	Up to 16 channels
Audio In/Out	1/1, RCA
Display Resolution	1920 × 1080, 1280 × 1024, 1280 × 720
Network Interface	1 RJ-45 Port (10/100 Mbps)
HDD	1 SATA port, up to 6 TB
Dimensions	260 mm × 238 mm × 48 mm (W × D × H)
Smart Functions	SMD Plus
VGA Output	1920 × 1080, 1280 × 1024, 1280 × 720
Operating Temperature	-10°C to +55°C
Operating Humidity	10%–90% (RH), non-condensing