Daikin Altherma 3 R W - Mounting the Indoor Unit; About Mounting the Indoor Unit; Precautions When Mounting the Indoor Unit; To Install the Indoor Unit

7 | Unit installation
Installer reference guide
87
ERLA11~16D + EBBH/X11+16D
Daikin Altherma 3 R W
4P643603-1B – 2022.05
4 N • m
4×
T25
1
2
2
1
7.4 Mounting the indoor unit
7.4.1 About mounting the indoor unit
When
You have to mount the outdoor and indoor unit before you can connect the
refrigerant and water piping.
Typical workflow
Mounting the indoor unit typically consists of the following stages:
1 Installing the indoor unit.
2 Connecting the drain hose to the drain.
7.4.2 Precautions when mounting the indoor unit
INFORMATION
Also read the precautions and requirements in the following chapters:
▪ "2General safety precautions"[410]
▪ "7.1Preparing the installation site"[466]
7.4.3 To install the indoor unit
1 Fix the wall bracket (accessory) to the wall (level) with 2× Ø8mm bolts.