Daktronics VFC-3000 User Manual

– 9 –
4 Modes and Main Menu
Remote Mode
Figure 5 illustrates the Remote Mode menu. Each line in this menu provides display
information.
• Line 1 lists the display conguration.
• Line 3 instructs you to switch to local mode to log in.
• Line 5 shows the current time and date on the controller.
• Line 6 pages through rmware version, display legibility, current message, message
source, and display brightness. Figure 5 shows the display legibility.
• Line 7 shows the current mode (remote).
While in remote mode, press the up and down arrow keys to adjust LCD contrast.
Local Mode
Logging In
Users must log into the VFC-3000 controller to view or change settings.
1. Push the Local/Remote toggle switch; the Local Mode menu opens. Refer to
Figure 6.
2. If necessary, enter the password. A * appears for each number pressed. Press the
Cancel key to clear an entered number.
Note: The controller defaults to have no password; skip to the next step if you do
not have a password.
Figure 5: Remote Mode
Figure 6: Local Mode—logged out

Daktronics VFC-3000 Specifications

General

Brand	Daktronics
Model	VFC-3000
Category	Controller
Language	English