Daktronics VFC-3000 User Manual

– 32 –
Set Date and Time
The Date and Time function sets the date and time on the controller.
1. Enter the timezone by pressing the number of the timezone; refer to Figure 70.
2. Select whether to enable or disable Daylight Savings Time (DST); refer to Figure 71. If
DST is enabled, the controller will automatically adjust the time for daylight savings.
3. Set the date and time with the keypad, typing a 2 for a.m. or a 7 for p.m. Then press
Enter to set the time and date, or press Cancel to return to DST.
Controller Serial Number
Each VFC-3000 controller has a serial number located on the front panel interface. To
record the controller’s serial number, type the serial number of the controller in the menu
and press Enter. The serial number is now listed next to the Controller Serial Number option
in the System Conguration menu for easy reference.
Figure 70: Timezone
Figure 71: DST
Figure 72: Set Date and Time
Figure 73: Controller Serial Number

Daktronics VFC-3000 Specifications

General

Brand	Daktronics
Model	VFC-3000
Category	Controller
Language	English