DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 14
4.5 Outdoor Use
4.5.1 Box Camera DF4910HD-DN
The box camera DF4910HD-DN is designed for indoor use.
For outdoor use, the camera must always be installed in a proper weather-proof housing.
However, note that direct sunlight can cause very high temperatures inside the housing.
In this case, it is absolutely necessary to use a ventilated, temperature-controlled weath-
er-proof metal housing and a sunshield where required.
In addition, a metal slide should always be used if the camera is installed in a (weather-
proof) housing to ensure optimal heat dissipation.
4.5.2 Dome Camera DDF4910HDV-DN-IM
The dome camera DDF4910HDV-DN-IM (in-ceiling mount variant) is exclusively designed
for indoor installations.
An outdoor installation is prohibited and may result in malfunction, damage, data loss and
loss of warranty.
4.5.3 Dome Camera DDF4910HDV-DN-SM
The dome camera DDF4910HDV-DN-SM (surface mount variant) is designed for indoor
installations.
However, an outdoor installation may be permitted, but only in compliance with the follow-
ing instructions/recommendations:
• Use only IP67 (Ingress Protection 67) approved components and assemblies.
• Always use the delivered O-rings.
• Adhere the delivered adhesive-backed gasket to the bottom of the housing base.
• Always use the delivered cable gland (or equivalent) for the cable feedthrough.
• Protect the device from direct inuence of weather conditions (rainfall, direct sunlight, etc.).
• Always use a protected installation site (e.g. under a canopy).
• For wall mount installations, align the camera housing with the cable gland pointing
down whenever possible.
To Next Page
Loading...
