dallmeier DF4910HD-DN - Digital Image Shift Functionality

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 86
13 Digital Image Shift
The “Digital Image Shift” function allows for a subsequent ne alignment of the selected
image section.
Depending on the set resolution, a certain area of the sensor is in each case used to
capture the image, yet never the entire sensor area.
By using Digital Image Shift, the used sensor area can be digitally shifted and thus the
monitored image section can be ne-tuned.
That function is particularly useful if, once the camera has been installed, it turns out that
the selected image section does not exactly meet your requirements.
 Click Digital Image Shift ... in the conguration menu.
FIg. 13-1
In the example above, the dened image section does not exactly meet the requirements
following the installation of the camera.
The garage (on the left of the image) is only half captured by the image capturing sensor.
However, using the arrow buttons the image section can be easily shifted via the web
browser afterwards.
 Left-click on an arrow button in order to shift the image section accordingly.
Left-click and hold an arrow button longer in order to shift the image section faster.