dallmeier DF4910HD-DN - Group Login

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 39
 Open the Login options dialogue via
Common settings > User management > Login options ....
Fig. 8-6
 Set the Login mode.
Note the following sections about the different login modes.
 Finally, conrm with OK.
8.4.1.1 Group Login
The group names of the three local user groups can be changed.
Note that
• the factory default password of the local user group Group 1: admin is “3”.
• the factory default password of the local user group Group 1: admin must be changed
for security reasons.
• the local user groups Group 2: user and Group 3: guest are dened without a factory
default password.
• a login of the local user groups Group 2: user and Group 3: guest is only possible
after a password has been dened.
 Open the User groups dialogue via
Common settings > User management > User groups ....
Fig. 8-7