dallmeier DF4910HD-DN - Encoder 2; Encoder 3

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 67
10.5.2 Encoder 2
Encoder 2 is disabled by default.
Note that the availability of the Encoder 2 option depends on the settings made in the
Encoder 1 tab.
 Select the Encoder 2 tab.
Fig. 10-8
 If required, activate the Use encoder checkbox to enable Encoder 2.
 Select the required settings (see section “Encoder 1” on page 64).
 Conrm with OK.
10.5.3 Encoder 3
Encoder 3 is disabled by default.
Encoder 3 only supports the encoding standard H.264.
Note that the availability of the Encoder 3 option depends on the settings made in the
Encoder 1 tab and Encoder 2 tab.
 Select the Encoder 3 tab.
Fig. 10-9
 If required, activate the Use encoder checkbox to enable Encoder 3.
 Select the required settings (see section “Encoder 1” on page 64).
 Conrm with OK.