dallmeier DF4910HD-DN - Manual Configuration; Time Server

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 37
8.2.1 Manual Conguration
Note that no manual conguration is possible if the UTC time server synchronization is
enabled.
 Select the Date/Time tab.
Fig. 8-3
 Set the Date.
 Set the Time.
 Conrm with OK.
8.2.2 Time Server
Note that the time server must always be accessible via the network.
 Select the Time server tab.
Fig. 8-4
 Enter the IP address (or the host name) of the time server.
 Activate the Use time server checkbox to enable the UTC time server synchronization.
 Conrm with OK.
If using the host name instead of the IP address, ensure that the Domain Name System
(DNS) settings are correctly congured (see section “Domain Name System (DNS)” on
page 47). Contact your network administrator for more information and assistance.