dallmeier DF4910HD-DN - Configuration Transfer to Several Devices

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 92
14.5.2.2 Conguration Transfer to Several Devices
As a precondition all relevant devices must be located in the same LAN (with suitable
cabling and a separate IP address for each device). In addition, the access rights to all
devices must be identical (same user name and password).
Before the conguration le can be transferred, it must be saved as described above.
However, the conguration of the Network settings must not be included in the congu-
ration le. If these settings were included, the same IP address would be transferred to
all devices. Since, however, every IP address in a LAN must be unique, this would cause
massive problems in the network.
NOTICE
Ensure that the conguration of the Network settings is not transferred to
several devices.
To be able to send the conguration le to several devices, a connection to one of the
devices must be established rst (see section “Connection” on page 32).
 Open the Conguration le management dialogue via
Service > Conguration le > Upload ....
Fig. 14-7
 Click Browse….
 Select the relevant conguration le on your data storage device.
 Activate the Broadcast checkbox.
 Enter the First IP address and the Last IP address of the relevant device group.
 Enter the Username.
 Enter the Password.
 Conrm with OK.
At the end of the transfer a list of the transferred (or skipped) conguration settings is
displayed.