28
Operational Reference Linea SWIR GigE Series Camera
Camera Information Category
Camera information is retrieved via a controlling application. Parameters such as camera model,
firmware version, etc. uniquely identify the connected Linea SWIR GigE device. These features are
typically read-only.
Information is grouped specific to the individual GigE Vision camera. In this category, the number
of features shown is identical whether the view is Beginner, Expert or Guru. Features listed in the
description table but tagged as invisible are usually for Teledyne DALSA or third party software
usage—not typically needed by end user applications.
Figure 15: Camera Information Features
Camera Information Feature Descriptions
The following table describes the parameters, attributes and device version when the feature was
introduced. Additionally the Device Version column will indicate which parameter is a member of
the DALSA Features Naming Convention (denoted by DFNC), versus the GenICam Standard
Features Naming Convention (SFNC not shown).
To Next Page
Loading...
