Dalsa Linea SWIR GigE Series User Manual

94
•
Technical Specifications Linea SWIR GigE Series Camera
Connectors
• The camera has a single RJ45 Ethernet connector for control and video data to the host
Gigabit NIC. For industrial environments, the camera supports the use of screw lock Ethernet
cables (see Ruggedized RJ45 Ethernet Cables).
• Note: Connect power via PoE or the I/O connector, not both. Although the camera has
protection, differences in ground levels may cause operational issues or electrical faults.
• There is a single 10-pin connector (SAMTEC connector TFM-105-02-L-D-WT) for all I/O signals
and auxiliary DC power source. The camera supports connecting cables with retention clips or
screw locks.
• See I/O Mating Connector Sources for information about the mating connector or complete
cable solutions with retention clips. See 10-Pin I/O Connector Pinout Details for the pinout
number assignment (external view of the camera body connector).
3D View of the camera’s connector TFM-105-02-L-D-WT
Figure 50: I/O Connector 3D View

Dalsa Linea SWIR GigE Series Specifications

General

Brand	Dalsa
Model	Linea SWIR GigE Series
Category	Digital Camera
Language	English