Linea SWIR GigE Series Camera Operational Reference
85
File Access Control Category
File Access control in CamExpert allows the user to quickly upload camera firmware and Flat Field
coefficients or download data.
Figure 44: File Access Features
File Access Control Feature Descriptions
Device Version number represents the camera software functional group, not a firmware revision
number. As the Linea SWIR GigE camera’s capabilities evolve the device version tag will increase,
identifying the supported function package. New features for a major device version release will be
indicated by green text for easy identification.
Display Name Feature & Values Description Device
Version &
View
File Selector FileSelector Selects the file to access. The file types which are
accessible are device-dependent.
Guru
Firmware Firmware1 Upload new firmware to the camera, which will execute on
the next camera reboot cycle. Select the DeviceReset
feature after the upload completes.
Factory Flat Line coefficients 1 FlatFieldCoefficients01 Select Factory Flatfield coefficients 1.
User Flat Line coefficients 1 FlatFieldCoefficients1 Select user Flat Line coefficients1.
User Flat Line coefficients 2 FlatFieldCoefficients2 Select user Flat Line coefficients2.
User Flat Line coefficients 3
FlatFieldCoefficients3 Select user Flat Line coefficients3.
User Flat Line coefficients 4 FlatFieldCoefficients4 Select user Flat Line coefficients4.
Factory Defective Pixel Map BadPixelCoordinate0 Select the Factory Defective Pixel Map.
User Defective Pixel Map BadPixelCoordinate1 Select the User Defective Pixel Map.
User Defined Saved Image userDefinedSavedImage Upload and download an image in the camera.
Open Source Licenses SoftwareLicenses Open Source Software Licenses.
File Operation Selector FileOperationSelector Selects the target operation for the selected file in the
device. This operation is executed when the File Operation
Execute feature is called.
Guru
Open Open Select the Open operation - executed by
FileOperationExecute.
Close Close Select the Close operation - executed by
FileOperationExecute
Read Read Select the Read operation - executed by
FileOperationExecute.