Dalsa Linea SWIR GigE Series - Page 83

Linea SWIR GigE Series Camera Operational Reference
•
81
Exclusive Access ExclusiveAccess Grants exclusive access to the device to
an application. No other application can
control or monitor the device.
DFNC
Control Access ControlAccess Grants control access to the device to an
application. No other application can
control the device.
Current Heartbeat Timeout GevHeartbeatTimeout Indicates the current heartbeat timeout in
milliseconds.
1.00
Guru
GVCP Heartbeat Disable GevGVCPHeartbeatDisable Disables the GVCP (GigE Vision Control
Protocol) heartbeat monitor. This allows
control switchover to an application on
another device.
1.00
Expert
Communication Timeout (in
msec)
GevMCTT Provides the transmission timeout value in
milliseconds.
1.00
Guru
Communication
Retransmissions Count
GevMCRC Indicates the number of retransmissions
allowed when a message channel message
times out.
1.00
Guru
Send Test Packet GevSCPSFireTestPacket When this feature is set to True, the
device will send one test packet.
1.00
Invisible
MAC Address GevMACAddress MAC address of the network interface.
(RO)
1.00
Invisible
Current Camera IP
Configuration
GevCurrentIPConfiguration Current camera IP configuration of the
selected interface. (RO)
1.00
Invisible
LLA LLA Link-Local Address Mode.
DHCP DHCP Dynamic Host Configuration Protocol
Mode. Network requires a DHCP server.
PersistentIP PersistentIP Persistent IP Mode. (static)
Persistent IP Address GevPersistentIPAddress Persistent IP address for the selected
interface. This is the IP address the
camera uses when booting in Persistent IP
mode.
1.00
Invisible
Persistent Subnet Mask GevPersistentSubnetMask Persistent subnet mask for the selected
interface.
1.00
Invisible
Persistent Default Gateway GevPersistentDefaultGateway Persistent default gateway for the selected
interface.
1.00
Invisible
Primary Application Socket GevPrimaryApplicationSocket Returns the UDP (User Datagram Protocol)
source port of the primary application.
(RO)
1.00
Invisible
Device Access Privilege
Control
GevCCP Controls the device access privilege of an
application.
1.00
Invisible
Open Access OpenAccess OpenAccess.
Exclusive Access ExclusiveAccess Grants exclusive access to the device to
an application. No other application can
control or monitor the device.
Control Access ControlAccess Grants control access to the device to an
application. No other application can
control the device.
Interface Selector GevInterfaceSelector Selects which physical network interface
to control.
1.00
Invisible
Number Of Interfaces GevNumberOfInterfaces Indicates the number of physical network
interfaces supported by this device. (RO)
1.00
Invisible
Message Channel Count GevMessageChannelCount Indicates the number of message
channels supported by this device. (RO)
1.00
Invisible
Stream Channel Count GevStreamChannelCount Indicates the number of stream channels
supported by this device (0 to 512). (RO)
1.00
Invisible
Gev Supported Option
Selector
GevSupportedOptionSelector Selects the GEV option to interrogate for
existing support. (RO)
1.00
Invisible
IPConfigurationLLA
IPConfigurationDHCP
IPConfigurationPersistentIP
StreamChannelSourceSocket