Danfoss VLT 6000 HVAC Series User Manual

009 Small display readout 1.2
(SMALL READOUT 2)
Value:
See parameter 007 Large display readout
Motorcurrent [A] [5]
Function:
See the functional description for parameter 008 Small
display readout. Data option LCP display text [29] can-
not be selected with Small display readout.
Description of choice:
There is a choice of 33 different data values, see pa-
rameter 007 Large display readout.
010 Small display readout 1.3
(SMALL READOUT 3)
Value:
Se parameter 007 Large display readout
Power [kW] [6]
Function:
See the functional description for parameter 008 Small
data readout. Data option LCP display text [29] cannot
be selected with Small display readout.
Description of choice:
There is a choice of 33 different data values, see pa-
rameter 007 Large display readout.
011 Unit of local reference
(UNIT OF LOC REF)
Value:
Hz (HZ) [0]
% of output frequency range (%) (% OF
FMAX) [1]
Function:
This parameter decides the local reference unit.
Description of choice:
Choose the required unit for local reference.
012 Hand start on LCP
(HAND START BTTN)
Value:
Disable (DISABLE) [0]
Enable (ENABLE) [1]
Function:
This parameter allows selection/deselection of the
Hand start key on the control panel.
Description of choice:
If Disable [0] is selected in this parameter, the [HAND
START] key will be inactive.
013 OFF/STOP on LCP
(STOP BUTTON)
Value:
Disable (DISABLE) [0]
Enable (ENABLE) [1]
Function:
This parameter allows selection/deselection of the lo-
cal stop key on the control panel.
Description of choice:
If Disable [0] is selected in this parameter, the [OFF/
STOP] key will be inactive.
NB!
If Disable is selected, the motor cannot be
stopped by means of the [OFF/STOP]
key.
014 Auto start on LCP
(AUTO START BTTN)
Value:
Disable (DISABLE) [0]
Enable (ENABLE) [1]
Function:
This parameter allows selection/deselection of the au-
to start key on the control panel.
Description of choice:
If Disable [0] is selected in this parameter, the [AUTO
START] key will be inactive.
VLT
®
6000 HVAC Series
= factory setting, () = display text, [] = value for use in communication via serial communication port
MG.61.B5.02 - VLT
®
is a registered Danfoss trademark 105
Programming

Danfoss VLT 6000 HVAC Series Specifications

General

Brand	Danfoss
Model	VLT 6000 HVAC Series
Category	DC Drives
Language	English