Danfoss VLT AQUA Drive FC 202 Design Manual

6 Options and Accessories Overview
6.1 Fieldbus Devices
This section describes the eldbus devices that are
available with the VLT
®
AQUA Drive FC 202 series. Using a
eldbus device reduces system cost, delivers faster and
more ecient communication, and provides an easier user
interface. For ordering numbers, refer to
chapter 13.2 Ordering Numbers for Options and Accessories.
6.1.1
VLT
®
PROFIBUS DP-V1 MCA 101
The VLT
®
PROFIBUS DP-V1 MCA 101 provides:
•
Wide compatibility, a high level of availability,
support for all major PLC vendors, and compati-
bility with future versions.
•
Fast, ecient communication, transparent instal-
lation, advanced diagnosis, and parameterization
and auto-conguration of process data via a GSD
le.
•
Acyclic parameterization using PROFIBUS DP-V1,
PROFIdrive, or Danfoss FC prole state machines.
6.1.2
VLT
®
DeviceNet MCA 104
The VLT
®
DeviceNet MCA 104 provides:
•
Support of the ODVA AC drive prole supported
via I/O instance 20/70 and 21/71 secures compati-
bility to existing systems.
•
Benets from ODVA’s strong conformance testing
policies that ensure products are interoperable.
6.1.3
VLT
®
PROFINET MCA 120
The VLT
®
PROFINET MCA 120 combines the highest
performance with the highest degree of openness. The
option is designed so that many of the features from the
VLT
®
PROFIBUS MCA 101 can be reused, minimizing user
eort to migrate PROFINET and securing the investment in
a PLC program.
•
Same PPO types as the VLT
®
PROFIBUS DP V1
MCA 101 for easy migration to PROFINET.
•
Built-in web server for remote diagnosis and
reading out of basic drive parameters.
•
Supports MRP.
•
Supports DP-V1. Diagnostic allows easy, fast, and
standardized handling of warning and fault
information into the PLC, improving bandwidth in
the system.
•
Supports PROFIsafe when combined with VLT
®
Safety Option MCB 152.
•
Implementation in accordance with Conformance
Class B.
6.1.4
VLT
®
EtherNet/IP MCA 121
Ethernet is the future standard for communication at the
factory oor. The VLT
®
EtherNet/IP MCA 121 is based on
the newest technology available for industrial use and
handles even the most demanding requirements.
EtherNet/IP™ extends standard commercial Ethernet to the
Common Industrial Protocol (CIP™) – the same upper-layer
protocol and object model found in DeviceNet.
This option oers advanced features such as:
•
Built-in, high-performance switch enabling line-
topology, which eliminates the need for external
switches.
•
DLR Ring (from October 2015).
•
Advanced switch and diagnosis functions.
•
Built-in web server.
•
E-mail client for service notication.
•
Unicast and Multicast communication.
6.1.5
VLT
®
Modbus TCP MCA 122
The VLT
®
Modbus TCP MCA 122 connects to Modbus TCP-
based networks. It handles connection intervals down to
5 ms in both directions, positioning it among the fastest
performing Modbus TCP devices in the market. For master
redundancy, it features hot swapping between 2 masters.
Other features include:
•
Built-in web-server for remote diagnosis and
reading out basic drive parameters.
•
Email notication that can be congured to send
an email message to 1 or more recipients when
certain alarms or warnings occur, or when they
are cleared.
•
Dual master PLC connection for redundancy.
Options and Accessories Ove... Design Guide
MG22B222 Danfoss A/S © 01/2018 All rights reserved. 37
6
6

Danfoss VLT AQUA Drive FC 202 Specifications

General

Brand	Danfoss
Model	VLT AQUA Drive FC 202
Category	DC Drives
Language	English