Danfoss VLT AQUA Drive FC 202 Design Manual

4 Product Overview
4.1
VLT
®
High-power Drives
The Danfoss VLT
®
drives described in this manual are available as free-standing, wall-mounted, or cabinet-mounted units.
Each VLT
®
drive is congurable, compatible, and eciency-optimized for all standard motor types, which avoids the
restrictions of motor-drive package deals.
Benets of VLT
®
Drives
•
Available in various enclosure sizes and protection ratings.
•
98% eciency reduces operating costs.
•
Unique back-channel cooling design reduces the need for more cooling equipment, resulting in lower installation
and recurring costs.
•
Lower power consumption for control room cooling equipment.
•
Reduced ownership costs.
•
Consistent user interface across the entire range of Danfoss drives.
•
Application-oriented start-up wizards.
•
Multi-language user interface.
4.2 Enclosure Size by Power Rating
kW
1)
Hp
1)
Available enclosures
110 150 D1h/D3h/D5h/D6h
132 200 D1h/D3h/D5h/D6h
160 250 D1h/D3h/D5h/D6h
200 300 D2h/D4h/D7h/D8h
250 350 D2h/D4h/D7h/D8h
315 450 D2h/D4h/D7h/D8h
355 500 E1h/E3h
400 600 E1h/E3h
450 600 E1h/E3h
500 650 E2h/E4h
560 750 E2h/E4h
Table 4.1 Enclosure Power Ratings, 380–480 V
1) All power ratings are taken at normal overload.
Output is measured at 400 V (kW) and 460 V (hp).
kW
1)
Hp
1)
Available enclosures
75 75 D1h/D3h/D5h/D6h
90 100 D1h/D3h/D5h/D6h
110 125 D1h/D3h/D5h/D6h
132 150 D1h/D3h/D5h/D6h
160 200 D1h/D3h/D5h/D6h
200 250 D2h/D4h/D7h/D8h
250 300 D2h/D4h/D7h/D8h
315 350 D2h/D4h/D7h/D8h
400 400 D2h/D4h/D7h/D8h
450 450 E1h/E3h
500 500 E1h/E3h
560 600 E1h/E3h
630 650 E1h/E3h
710 750 E2h/E4h
800 950 E2h/E4h
Table 4.2 Enclosure Power Ratings, 525–690 V
1) All power ratings are taken at normal overload.
Output is measured at 690 V (kW) and 575 V (hp).
Product Overview
VLT
®
AQUA Drive FC 202
12 Danfoss A/S © 01/2018 All rights reserved. MG22B222
44

Danfoss VLT AQUA Drive FC 202 Specifications

General

Brand	Danfoss
Model	VLT AQUA Drive FC 202
Category	DC Drives
Language	English