Danfoss vlt FC 102 - Page 226

23-64 Timed Period Stop
Range: Function:
Size
related*
[ 0 - 0 ]
NOTICE
When mounting VLT
®
Analog
I/O Option MCB 109, a battery
back-up of the date and time
is included.
Set the date and time at which the
trend analyses must stop updating
the timed bin counters.
Date format depends on the setting
in parameter 0-71 Date Format, and
time format on the setting in
parameter 0-72 Time Format.
23-65 Minimum Bin Value
Range: Function:
Size
related*
[ 0 - 100 %] Array with 10 elements ([0]–[9]
below parameter number in
display). Press [OK] and step
between elements with [
▲
] and [
▼
].
Set the minimum limit for each
interval in
parameter 23-61 Continuous Bin
Data and parameter 23-62 Timed Bin
Data. Example: If selecting [1]
counter and changing setting from
10% to 12%, [0] counter is based on
the interval 0 to <12% and [1]
counter on interval 12 to <20%.
23-66 Reset Continuous Bin Data
Option: Function:
[0] * Do not reset Select [1] Do reset to reset all values
in parameter 23-61 Continuous Bin
Data. After pressing [OK], the
setting of the parameter value
automatically changes to [0] Do not
reset.
[1] Do reset
23-67 Reset Timed Bin Data
Option: Function:
Select [1] Do reset to reset all
counters in parameter 23-62 Timed
Bin Data.
After pressing [OK], the setting of
the parameter value automatically
changes to [0] Do not reset.
[0] * Do not reset
[1] Do reset
Parameter Descriptions
VLT
®
HVAC Drive FC 102
224 Danfoss A/S © 10/2019 All rights reserved. M0010001
33