Danfoss vlt soft starter mcd 500 - Protection Action; Factory Parameters

8.10 Protection Action
16-1 to 16-13 Protection Action
Option: Function:
Selects the soft starter response to each
protection.
•
16-1 Motor Overload.
•
16-2 Current Imbalance.
•
16-3 Undercurrent.
•
16-4 Inst Overcurrent.
•
16-5 Frequency.
•
16-6 Heat sink Overtemp.
•
16-7 Excess Start Time.
•
16-8 Input A Trip.
•
16-9 Motor Thermistor.
•
16-10 Starter/Comms.
•
16-11 Network/Comms.
•
16-12 Battery/Clock.
•
16-13 Low Control Volts.
Trip starter*
Warn and
log
Log only
8.11 Factory Parameters
These parameters are restricted for factory use and are not
available to the user.
Parameter Descriptions Operating Guide
MG17K602 Danfoss A/S © 05/2016 All rights reserved. 71
8 8