Introduction User Guide
2
About this manual This user guide contains a detailed description of the printer, its
characteristic features and additional information.
` Chapter 1 Printer at a glance lists all the parts of the printer.
` Chapter 2 Installation contains start-up instructions and points to no-
te.
` Chapter 3 Printer drivers and firmware provides instructions for in-
stalling the printer driver.
` Chapter 4 Control panel explains how to control printer operations.
` Chapter 5 Print media tells you how to load, transport and eject
media.
` Chapter 6 Changing the ribbon cassette explains how to remove and
install a ribbon cassette.
` Chapter 7 Replacing the print head explains how to remove and
install a print head.
` Chapter 8 Menu contains all the information necessary for con-
trolling the printer via the control panel.
` Chapter 9 Troubleshooting provides instructions for rectifying faults
which do not require the intervention of qualified personnel.
` Chapter 10 Care and maintenance provides information on the up-
keep of the printer and contains important information in case the
printer has to be transported.
` Appendix A Specifications informs you about the technical specifi-
cations of your printer and the paper which should be used.
` Appendix B Character sets lists the available character sets.
` Appendix C Emulations deals with programming via the interface.
` Appendix D Interfaces explains the interfaces.
` Appendix E Consumables and accessories contains information
about consumables and accessories which can be purchased for
your printer.
To Next Page
Loading...
