User Guide Installation
5
Installation
Unpacking the printer Place your packaged printer on a solid base.
Make sure that the “Up” symbols is pointing up.
Open the packaging, lift the printer out of the cardboard box and re-
move the remaining packaging material.
Check the printer for any visible transport damage and missing items.
The following items should be enclosed:
` The Quick start guide (QSG)
` This CD-ROM (at the back of the Quick start guide)
` The power cable
` The ribbon cartridge
If you find any transport damage or if any accessories are missing, plea-
se contact your dealer.
2
To Next Page
Loading...
