Dascom T5040 - List of Available Control Codes; PR2 Mode

User Guide Emulations
111
List of available control
codes
The following table shows the available sequences in the various emu-
lations.
If you want to know more about control codes, we recommend our
Programmer’s Application Manual on this CD-ROM. Detailled infor-
mation on PR2 control codes can be found in the original PR2 pro-
grammer’s manual.
PR2 mode
Command sequence Function
Page Layout
ESC Q nnn mmm ESC Z Define document length
ESC J nnn Define left margin
ESC T nnn Define top of form " TOF"
ESC M nnn Define bottom of form "BOF"
ESC & nn Elementary vertical spacing
Print Pitches
ESC < Print pitch 10 cpi
ESC = Print pitch 12 cpi
ESC > Print pitch 166 cpi
ESC a n Print pitch
ESC ? Proportional spacing
Print Attributes
ESC R nnn Select graphic font
ESC 3 Double width
ESC 4 Cancel double width
ESC d Double height and double width
ESC e Cancel double height and double width
ESC ! W 1 Double height
ESC ! W 0 Cancel double height
ESC ! sp nnn Add columns to the right of the character
ESC ( Bold face
ESC ) Cancel bold face
ESC * n Underline
ESC + Cancel underline
ESC ` n Superscript - Subscript
ESC { Cancel superscript-subscript
ESC S 5 Select printer device