Installation User Guide
6
Placing your printer Place the printer on a solid, flat, surface, ensuring that the printer is po-
sitioned in such a way that it can not topple, and that there is easy access
to the control panel and paper input tray. Also ensure there is sufficient
space for the printed output.
The power supply cable may be damaged if the paper edges con-
stantly chafe the insulating sheath. The user must always ensure
that there is sufficient distance between the power supply cable
and the paper.
Location
Minimum
space
Left and right side of the printer 1 cm
Top of the printer 2 cm
Rear of the printer to ensure sufficient
ventilation
10 cm
to print on a DIN A4 sheet 12 cm
min. 1 cm min. 1 cm
min. 2 cm
min. 10 cm
STOP
To Next Page
Loading...
