User Guide Installation
7
When selecting the printer location, observe the following additional
instructions:
Never place the printer in the vicinity of inflammable gas or
explosive substances.
` Protect the printer from shock, impact and vibration.
` Be sure to connect the printer to a socket with the correct mains
voltage.
` Do not expose the printer to direct sunlight. If you cannot avoid pla-
cing the printer near a window, protect it from the sunlight with a
curtain.
` When connecting the computer with the printer, make sure not to
exceed the permitted cable length (see
Interface specifications,
page 89).
` Ensure sufficient distance between the printer and any heating
radiators.
` Avoid exposing the printer to extreme temperature or air humidity
fluctuations. Take care to avoid the influence of dust.
` Always disconnect the system from the mains before opening the
device to perform maintenance work or remedy errors.
STOP
To Next Page
Loading...
