Operation ■ Safety Messages and Precautions
—14— Data I/O • 096-0461-001G
back
General Precautions
To avoid possible personal injury or damage to the equipment, please
observe the following practices:
• Do not operate the system unless you have been thoroughly
trained, and have read and understand the instructions in this
manual, particularly those that describe the system’s safety fea-
tures.
• Do not operate the system if the safety doors or access doors are
not in their normal operating positions.
• Do not place any part of your body into the direct path of mov-
ing parts.
• Do not disable or attempt to defeat any of the protective safety
features of this system. Personal injury or equipment damage
can occur if any safety systems are disabled. If you suspect that a
safety feature is damaged or malfunctioning, stop using the
machine immediately and contact Data I/O Customer Service or
a local Data I/O approved service representative.
• Use extra caution when working within the work surface. Open
safety doors do not cut power to all systems. Actuators can still
operate.
• Wearing hearing protection is recommended while operating
the machine if sound pressure levels exceed 85 decibels. Sound
levels may exceed 85 decibels depending on auxiliary equip-
ment running and your environment.
• Shut off the pressurized air or disconnect the air hose before ser-
vicing pneumatic parts.
To Next Page
Loading...
