Data I/O PSV7000 - 5 Socket Adapters and Actuator Plates; Socket Adapters and Actuator Plates; Finding Socket Adapter Part Numbers

Operation ■ Running a Job on PSV7000
—30— Data I/O • 096-0461-001G
back
5» Socket Adapters and Actuator Plates
Data I/O recommends installing Socket Adapters before a job has
been started (before the AH700 Software is started). However,
PSV7000 power can be ON.
Note: Neither Socket Adapters nor Actuator Plates are inter-
changeable between FlashCORE III programmers and LumenX
programmers.
Finding Socket Adapter Part Numbers
To find the correct Socket Adapter ID (part number) for your
device/job—
If AH700 has not yet been started:
1. Open TaskLink (TL) (for FlashCORE) or LumenX Data Manage-
ment Software (DMS).
2. Select your target job. (LX: See the Adapter column.)
3. (TL only) Click Edit, and then Footnotes.