AutoLab TF Dispenser Technical Manual – Revision 5
AutoLab TF dispensers Technical Manual TFTMTF / Rev 5.0 / 24
th
May 2006 Page 35 of 150
2-2 Electronic Cabinet
2-2-1 Control Panel
Main power switch
For turn on/off the main power source.
The button “ON”
For turn on the DC of the system, it will light if the DC is on.
The button “OFF”
For turn off the DC of the system, it will light if the DC is off.
Emergency stop
For stop all actions of AutoLab TF immediately. If you want to turn on AutoLab TF again,
you have to turn clockwise to release the knob.
Alarm
This device will be alarm to indicate error occurred on machine.
Agitation switch
“A” section is on the left and others are “B” and “C” sections in sequence.
Agitation speed controller
Turning it can change the speed of individual agitation.
To Next Page
Loading...
Need help?
General