Datacolor AutoLab TF Series User Manual

AutoLab TF Dispenser Technical Manual – Revision 5
AutoLab TF dispensers Technical Manual TFTMTF / Rev 5.0 / 24
th
May 2006 Page 94 of 150
2-4-2 Balance calibration
Mettler Scale
Internal Calibration
STEP1：Push the button on the plate for 3 seconds for automatic rectification.
STEP2： on the screen means rectification done.
External Calibration
（for 3, 4, 5, and 6 ㎏ scale）
STEP1：Push the button on the plate for 3 seconds, on the
screen.
STEP2：Push again for one time, on the screen.
STEP3：Push the button on the plate , and then on the screen.
STEP4：Push the button on the plate for 3 seconds, on the screen,
then back to main screen.
STEP5：Push the button on the plate for 3 seconds, on the
screen.
STEP6：Push the button on the plate for rectify the weight to 3000g.
STEP7：Push the button on the plate for 3 seconds, on the screen.
STEP8：Put calibrate weight 3 ㎏ for rectification, then on the screen flashing.
STEP9：Take down calibrate weight, on the screen for rectification done.
 For changing to Inside rectification, Please have change to saved.
1/10d
Cal
Cal done
Menu Reset
Menu Fact
T
F
Vari Cal
Menu
Stored
1/10d
Cal
Cal 5000g
T
F
Menu
3000g
0.00g
Cal done
Vari Cal
Fact

Datacolor AutoLab TF Series Specifications

General

Brand	Datacolor
Model	AutoLab TF Series
Category	Dispenser
Language	English