AutoLab TF Dispenser Technical Manual – Revision 5
AutoLab TF dispensers Technical Manual TFTMTF / Rev 5.0 / 24
th
May 2006 Page 6 of 150
About this manual
How to use this manual
This manual focuses on the hardware description and maintenance of the AutoLab TF-40, 80,
88, 120, 160 and 168 dispense. It Includes construction of system, introduction of all PLC
modules, maintenance procedure, troubleshooting guide etc. A great deal of information is
given herein, which will assist you in obtaining the best performance of the machine.
Fundament
ally the manual is arranged as follows:
Chapter 1：GETTING TO KNOW YOUR AUTOLAB TF
Chapter 2：HARDWARE
Chapter 3：TROUBLESHOOTING AND MAINTENANCE
To Next Page
Loading...
Need help?
General