Product Reference Guide 133
1D Symbologies
Introduction
The scanner supports the following 1D symbologies (bar code types). Symbol-
ogy-dependent options for each symbology are included in this chapter. See
"2D Symbologies" starting
on page 215
for configuration of 2D bar codes.
on page 135 INTERLEAVED 2 OF 5 (I 2 OF 5) on page 169
on page 138
INTERLEAVED 2 OF 5 CIP HR on page 174
on page 140
DATALO GIC 2 OF 5 on page 174
on page 140 (JAN 13)
CODABAR on page 178
on page 143 (JAN 8)
ABC CODABAR on page 184
ADD-ONS on page 146
CODE 11 on page 186
GS1 DATABAR
™
OMNIDIRECTIONAL on page
148
STANDARD 2 OF 5 on page 190
GS1 DATABAR™ EXPANDED on page 150 INDUSTRIAL 2 OF 5 on page 194
GS1 DATABAR™ LIMITED on page 153 on page 198
CODE 39 on page 154 on page 199
CODE 32 (ITALIAN PHARMACEUTICAL) on
page 161
on page 202
CODE 39 CIP (FRENCH PHARMACEUTICAL)
on page 162
CODE 93 on page 206
CODE 128 on page 163 FOLLETT 2 OF 5 on page 211
on page 168 on page 211
Standard Factory Settings for Symbologies
Default settings are indicated at each feature/option with a green arrow. Also
reference
Appendix B, for a listing of the most widely used
set of standard fac-
tory settings. That section also
provides space to record any custom settings
needed or implemented for your system.
UPC-A
UPC-E
EAN 13
EAN 13
EAN 8
IATA
ISBT 128
MSI
GS1-128 BC412
To Next Page
Loading...
