Datalogic Gryphon I GBT4500 - GS1 Databar Omnidirectional Enable;Disable; GS1 Databar Omnidirectional GS1-128 Emulation; GS1 Databar Omnidirectional

Enter/Exit Programming Mode GS1 DataBar
™
Omnidirectional
148 Gryphon™ I GD/GBT/GM4500
GS1 DataBar
™
Omnidirectional
The following options apply to the GS1 DataBar Omnidirectional (formerly RSS-
14) symbology.
GS1 DataBar Omnidirectional Enable/Disable
When disabled, the scanner will not read GS1 DataBar Omnidirectional bar
codes.
DEFAULT
GS1 DataBar Omnidirectional = Disable
GS1 DataBar Omnidirectional = Enable
GS1 DataBar Omnidirectional GS1-128 Emulation
When enabled, GS1 DataBar Omnidirectional bar codes will be translated to the
GS1-128 label data format.
DEFAULT
GS1 DataBar Omnidirectional GS1-128 Emulation =
Disable
GS1 DataBar Omnidirectional GS1-128 Emulation = Enable
$C4BEN00
$C4BEN01
$C4BU800
$C4BU801