Datalogic Gryphon I GBT4500 - Ean 13; EAN 13 Check Character Transmission; EAN 13 Enable;Disable

Enter/Exit Programming Mode EAN 13
140 Gryphon™ I GD/GBT/GM4500
EAN 13
The following options apply to the EAN 13 (Jan 13) symbology.
EAN 13 Enable/Disable
When disabled, the scanner will not read EAN 13/JAN 13 bar codes.
EAN 13 = Disable
EAN 13 = Enable
DEFAULT
EAN 13 Check Character Transmission
Enable this option to transmit the check character along with EAN 13 bar code
data.
EAN 13 Check Character Transmission = Don’t Send
EAN 13 Check Character Transmission = Send
DEFAULT
$C3BEN00
$C3BEN01
$C3BCT00
$C3BCT01