Wireless Features Enter/Exit Programming Mode
Product Reference Guide 271
STAR Radio Transmit Mode
Specifies the transmission protocol for Star communications.
Options are:
• ACK from cradle to scanner — signals a go
od transmission as soon as the
Base Station receives a label
• ACK when sent to host — scanner signals a good tr
ansmission as soon as
the Base Station has sent the label to the host
• ACK from host — scanner signals a good tr
ansmission as soon as the Base
Station has sent the label to the host and host has replied with an
acknowledge message.
ACK from cradle
ACK when sent to host
ACK from host
NOTE
NOTE
The Base Station can receive a host
message only if Host Commands
Obey/Ignore (page 35) is set to Ignore.
ACK from host works only for RS-232
or USB-COM interfaces with ACK/
NACK disabled. If ACK from host is configured with any other interface
conditions, it works like ACK when sent to host.
See
"Message Formatting"
on page 305 for details.
To Next Page
Loading...
