Product Reference Guide
263
Appendix B
Standard Defaults
The most common configuration settings are listed in the “Default” column of the table below.
Page references are also provided for feature
descriptions and programming barcodes for each
parameter. A column has also been provided for recording of
your preferred default settings for
these same configurable features.
Table 40. Standard Defaults
Parameter Default Your Setting
Page
Number
GLOBAL INTERFACE FEATURES
Host Commands — Obey/Ignore
Obey
19
RS-232 ONLY
Baud Rate
9600
22
Data Bits
8 Data Bits
23
Stop Bits
1 Stop Bit
23
Parity
None
24
Handshaking Control
Disable
25
RS-232/USB-COM
Intercharacter Delay
No Delay
27
Beep On ASCII BEL
Disable
27
Beep On Not on File
Enable
28
ACK Character
‘AC K’
29
NAK Character
‘NAK’
29
ACK NAK Timeout Value
200 ms
30
ACK NAK Retry Count
3 Retries
30
ACK NAK Error Handling
Ignore Errors Detected
31
To Next Page
Loading...
Need help?
General
