Coupon Control
Product Reference Guide
123
Coupon Control
This feature is used to control the method of processing coupon labels.
Options are:
• Allow all — allow all coupon barcodes to be decoded
• Enable only UPC/EAN — enables only UPC/EAN coupon decoding
• Enable only GS1 DataBar — enables only GS1 DataBar coupon decoding
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any unused barcodes
on this and the facing page to ensure that the reader sees only the barcode you intend to
scan.
3. Complete the programming sequence by scanning the SWITCH barcode.
ENTER/EXIT PROGRAMMING MODE
Coupon Control = Allow all
Coupon Control = Enable only UPC/EAN
Coupon Control = Enable only GS1 DataBar
To Next Page
Loading...
Need help?
General
