PRODUCT REFERENCE GUIDE 44
All HMI LEDs blink on power-up
This may occur after a software update that broke compatibility with
the previous version.
• Keep using latest software update (delete stored jobs): access the
WebApp and clear all configurations using the Clear Configurations
button on the Utilities page.
Discard latest software update (do not delete stored jobs): perform a
rollback procedure via HMI (see "Firmware Rollback and Reset Config-
urations (optional)" on page 6).
All HMI LEDs are off
This may occur after a software downgrade that compromise compat-
ibility of the saved data.
• Reset the configurations.
If the issue occurs:
• Perform a new rollback.
TROUBLESHOOTING GUIDE
PROBLEM SUGGESTION
To Next Page
Loading...
Need help?
General
