62
CODE SELECTION
EAN/UPC
C
ODE 39 (CODE 32)
C
ODE 128 (GS1-128, ISBT 128)
I
NTERLEAVED 2 OF 5
S
TANDARD 2 OF 5
C
ODABAR (ABC CODABAR)
C
ODE 11
GS1
DATABAR (OMNIDIRECTIONAL, EXPANDED, LIMITED)
C
ODE 93
MSI
1. Read the Enter/Exit Configuration code ONCE, available at the top of each page.
2. Read configuration codes from the desired groups.
= Read the code and follow the procedure on the indicated reference page
= Default value
3. Read the Enter/Exit Configuration code ONCE, available at the top of each page.
DISABLE ALL CODE SYMBOLOGIES
Use this feature to disable all symbologies.
1. Scan the ENTER/EXIT PROGRAMMING barcode below.
2. Scan the Disable All Symbologies barcode.
3. Complete the programming sequence by scanning the ENTER/EXIT
PROGRAMMING barcode.
Enter/Exit Configuration
ËÄ$PmIÎ
Disable All Code Symbologies
ËÄ$ADm+Î
To Next Page
Loading...
